Canada’s top-rated Nuna infant car seat, with True Lock install and GREENGUARD Gold certification.
The Nuna PIPA is a rear-facing infant car seat approved in Canada under CMVSS 213, carrying the National Safety Mark. It is GREENGUARD Gold certified, uses flame-retardant-free fabrics, and weighs just 7.9 lbs. Canadian specifications allow rear-facing use from 4 lbs to 35 lbs, up to 32 inches.
True Lock rigid LATCH locks the base securely, with green-for-go indicators confirming correct installation. Full-body side impact protection is built into the seat shell. A stability leg on the base reduces crash forces and limits rebound movement. A five-point harness with single-pull adjustment tightens securely in one motion. The dream drape canopy folds away until needed.
The Nuna PIPA lineup includes two distinct models. Choosing between them comes down to how you use your vehicle daily, not safety.
The standard Nuna PIPA includes a base with True Lock rigid LATCH installation. The base stays in your vehicle; the carrier clicks in and out for each trip. It is approved for rear-facing use from 4 lbs to 35 lbs, making it the longer-use option for families with a dedicated vehicle.
The Nuna PIPA Urbn is base-free. It uses a built-in pipaFIX rigid LATCH system installed directly from the seat shell, with no base required. Approved from 4 lbs to 22 lbs, it is designed for city life, ride-shares, taxis, and families who regularly switch vehicles.
In summary: the PIPA uses a True Lock base, supports up to 35 lbs, and suits families with one primary vehicle. The PIPA Urbn is base-free with pipaFIX rigid LATCH, supports up to 22 lbs, and suits city use and multi-vehicle families. Both models use rigid LATCH installation and carry the same core Nuna safety architecture.
Both models are available through authorized Nuna retailers in Canada. Visit the Nuna Collection page to confirm current availability and shop the full Nuna car seat range
The Nuna PIPA is compatible with all Nuna strollers and with many third-party strollers that accept a Maxi-Cosi style adapter. Adapter requirements vary by stroller model.
Nuna Tavo Next: No adapter is required. The PIPA clicks directly into the Tavo Next frame, making this the simplest pairing in the Nuna lineup.
Nuna Mixx Next: A ring adapter is included with the Mixx Next stroller. It attaches to the frame and allows one-click PIPA connection without removing the adapter between uses.
Silver Cross strollers: The Nuna PIPA is compatible with Silver Cross strollers using a separately sold Nuna adapter. Ask a Kido Bébé team member to confirm compatibility with your specific Silver Cross model and adapter availability.
UPPAbaby Vista and Cruz: The Nuna PIPA is compatible with the UPPAbaby Vista and Cruz using the Nuna ring adapter, sold separately. Ask a Kido Bébé team member about current adapter availability or check our Nuna collection page for the latest accessories.
Important: Nuna strollers are designed to accept Nuna PIPA series seats only. UPPAbaby and other brand car seats are not compatible with Nuna stroller frames.
The Nuna PIPA is available in-store and online at Kido Bébé, Montréal’s authorized Nuna retailer. Visit our boutique at 4100 Boulevard Thimens, Saint-Laurent, where our team can help you fit the PIPA, confirm stroller compatibility, and build your complete travel system. Call us at 1-866-430-0003 or shop the full Nuna collection online.
Parents shopping for an infant car seat in Canada encounter significant US-market content with different specifications. The information below reflects the Canadian version of the Nuna PIPA sold through authorized Canadian retailers.
CMVSS 213 compliance: The Nuna PIPA meets the Transport Canada federal motor vehicle safety standard for infant car seats sold in Canada and carries the National Safety Mark. CMVSS 213 compliance is required for legal sale in Canada. The Canadian version has been tested to Canadian standards, distinct from the US version.
GREENGUARD Gold certification: GREENGUARD Gold is a third-party certification from UL confirming the PIPA meets strict chemical emission standards for products in close contact with infants. This is an independent verification, not a brand self-claim.
Flame-retardant-free fabrics: No chemical flame retardant additives are used in Nuna PIPA fabrics. Nuna uses inherently flame-resistant materials instead of chemical treatments, a commitment that applies across all PIPA models. This makes the PIPA a relevant choice for parents seeking a Nuna car seat in Canada free of chemical fabric treatments.
Canadian specifications: Rear-facing from 4 lbs to 35 lbs, maximum height 32 inches. Seat weight: 7.9 lbs.
Expiry: The Nuna PIPA expires 7 years from the date of manufacture, printed on the seat label. Parents purchasing new will not face expiry during the seat’s active use period, typically birth to approximately 12 months. Nuna recommends replacing the seat after any collision, including minor ones.
Care: All PIPA fabrics are machine washable on a cold, delicate cycle.
The Nuna PIPA is approved for rear-facing use from 4 lbs to 35 lbs, with a maximum height of 32 inches. This is the confirmed Canadian specification, distinct from the US version. The removable infant insert provides additional head and body support for smaller babies from birth. Most infants outgrow the PIPA at approximately 12 months, at which point a rear-facing convertible car seat is the recommended next step.
The Nuna PIPA is available now at Kido Bébé, Montréal’s authorized Nuna retailer. Visit us at 4100 Boulevard Thimens or shop online.
Shop Nuna PIPA Shop Nuna PIPA
